What To Do If There Is No Hot Water

Book A Service Call

What are your ideas concerning What Would Cause My Electric Water Heater to Stop Working??



Numerous modern residences use an electrical water heater for their heating system, as a result of its comfort as well as ease of use. However, much like any other electrical appliances, issues may arise with its use, suddenly. It can be really irritating to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate or even also hot. Whatever the case might be, water heater problems can be quite aggravating. Luckily, we've made a checklist of possible solutions to your hot water heater problems. There are a variety of aspects that could create a number of these troubles, it could be a concern with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you switch off the main power supply for safety and security. Whatever the problem is, getting it taken care of should not present too much of a concern if you follow these actions:

Call A Professional:


If after changing all defective components and resetting your temperature level, the water heater still isn't functioning, you may require to contact a professional plumber for a specialist viewpoint. The trouble with your heating system could be that the hot and cold taps have actually been switched over or it may be undersized for the amount of warm water required in your home. Whatever the situation might be, a professional plumber would assist address the problem.

Check Your Power Supply:


As fundamental as this might appear, it is very required. Without appropriate power, your hot water heater will not work. So the first thing to do when your water unexpectedly retires is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the breaker stumbled. If the breaker is the issue, simply turn it on and off once more. Change any kind of broken or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't working or the water coming out isn't hot enough, you might require to examine the temperature level setups on your upper thermostat. Make sure the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This should help heat the water. Turn the circuit breaker back on and check if the problem has been dealt with.

Check the Heating Element in the Water Heater:


If it's not a power problem, then try having a look at your heating element if it is still working. Test each of your heating elements to be sure the problem isn't with any one of them. If any one of them is damaged, change that component and after that inspect whether the hot water is back on.

Final thought


Water heater problems are not always significant. Most of them result from small problems like a blown fuse or worn-out heating element. Replacing the faulty parts need to suffice. Nonetheless, if you are still not able to fix the issue, give a call to your nearest plumber to come to get it dealt with.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/


    How to Troubleshoot and Repair an Electric Water Heater

    I hope you liked our excerpt about What Would Cause My Electric Water Heater to Stop Working?. Thanks a ton for finding the time to read through our article. Enjoyed our write up? Please share it. Let other people find it. We take joy in reading our article about What Would Cause My Electric Water Heater to Stop Working?.




    Quote & Schedule

    Leave a Reply

    Your email address will not be published. Required fields are marked *